Data & check for building trust
home Product guide Technological material Proofreading Company introduction Inquiry
Home > Products guide > Measuring jig > Small chuck Japanese site
Products guide
push-pull tester
digital force gauge
load stand
digital torque checker
measuring jigs
Flat type chuck
Film chuck
Wedge chuck
Pin chuck
Small chuck
Round stick chuck
Coiling chuck
Vise chuck
X-Y table
PC torque analyzer
software to take date & etc.
CHSS series
CHSS series - CHSS series is made of steel.

- CHSS series has specialized shape to grip thin things such as cloth, tapes, films, and papers.
- It is used for pull test.
- Examples
The breaking test of a resin film with vertical load measuring stand (K-501H) and a push-pull gauge as below.   A small chuck (CHSS-8) and a flat type chuck (CHW-100N) are used.
Standard specification
Model CHSS-3 CHSS-8
External dimensional drawing CLICK! CLICK!
Maximum load 100N 100N
Width of chuckfs entrance 0`1mm 0`1mm
Width of chuck 3mm 8mm
Shape oftightening surface crossbar and pitch 0.8mm crossbar and pitch 0.8mm
Material teel teel
- Please write gseth when you order a set of upper and lower jig.
- When you order a set, the board for installing resisting pressure board is attached to one side of the chuck.
 The board for installing resisting pressure board isnft attached when you order single unit.
If you need the board, you can get it optionally.
- We will remodel the above-mentioned special items to your requested jig.
- The above-mentioned special items have been manufactured by our company before. We will produce special jigs depend on your request except for the above-mentioned items.
Please feel free to contact us.
It makes an effort as brought close to a color as original as possible, and there is an image when it is actual and it differs somewhat from the color.
Please acknowledge it.
All contents Copyright:ATTONIC
All Rights Reserved
ATTONIC LTD. 600-5, Higashitakada-cho, Toyohashi, Aichi, Japan
info@attonic.co.jp