Data & check for building trust
home Product guide Technological material Proofreading Company introduction Inquiry
Home > Products guide > Push-pull tester Japanese site
Products guide
digital force gauge
load stand
digital torque checker
measuring jigs
PC torque analyzer
software to take date & etc.
push-pull tester
AP series AP series
It is light and low-priced commodity thanks to Reinforced plastic body.

Maximum measuring range corresponds from 3N(300gf corresponding) to 500N(50kgf corresponding) by ten models in total.
Three kinds of attachments are equipped normally, and four kinds of options are being prepared.
The accuracy is 亇0.2% of full scale.  When the unit is calibrated, it is inspected at 10 divided points of its maximum load and the result is written in certificate. (3N, 30N, and 300N type are inspected at six points. )
In detail

MP series MP series
Strong body made of aluminum die casting

Accuracy and function equal to AP series are possessed.
Maximum measuring range corresponds from 3N(300gf corresponding) to 500N(50kgf corresponding) by ten models in total.
Seven kinds of attachments are equipped normally.
The accuracy is 亇0.2% of full scale.  When the unit is calibrated, it is  inspected at 10 divided points of its maximum load and the result is written in certificate. (3N, 30N, and 300N type are inspected at six points. )
In detail

MPS series MPS series
Highly accurate measuring instrument with finer graduation in addition to strong body made of aluminum die cast

It consist of strong body made of aluminum die cast as well as MP series.
Maximum measuring range corresponds from 10N(1kgf corresponding) to 500N(50kgf corresponding) by ten models in total.
The division of the scale is detailed and minimum scale is 1/2 of standard type. Please use it for accurate inspection.
 The accuracy is 亇0.1% of full scale.  When the unit is calibrated, it is  inspected at 10 divided points of its maximum load and the result is written in certificate. (30N, and 300N type are inspected at six points. )
Seven kinds of attachments are equipped normally.
In detail

MPL series MPL series
High load measuring instrument of 1000N or more (100kgf corresponding)

Maximum measuring range corresponds from 1000N(100kgf corresponding) to 5000N(500kgf corresponding) by four models in total.
Seven kinds of attachments are equipped normally.
The accuracy is 亇0.5% of full scale.  When the unit is calibrated, it is inspected at 10 divided points of its maximum load and the result is written in certificate. (300N type is inspected at six points. )
In detail

MPC series MPC series
It will inform with the buzzer at a set load.

Accuracy and function equal to MP series are possessed.
Maximum measuring range corresponds from 20N(2kgf corresponding) to 500N(50kgf corresponding) by ten models in total.

Warning can be sent with the buzzer at a set load by the thing connected with control box (C-101) of the attachment.
Moreover, because an external output (open collector output) is possessed, the connection to the external instrument is also possible.
Of course, the main body can be used independently. (In this case, the buzzer function isn乫t available. )
Seven kinds of attachments are equipped normally.
In detail

All contents Copyright:ATTONIC
All Rights Reserved
姅幃夛幮傾僩僯僢僋 600-5, Higashitakada-cho, Toyohashi, Aichi, Japan
info@attonic.co.jp