Data & check for building trust
home Product guide Technological material Proofreading Company introduction Inquiry
Home > Products guide > Measuring jig > Film chuck Japanese site
Products guide
push-pull tester
digital force gauge
load stand
digital torque checker
measuring jigs
Flat type chuck
Film chuck
Wedge chuck
Pin chuck
Small chuck
Round stick chuck
Coiling chuck
Vise chuck
X-Y table
PC torque analyzer
software to take date & etc.
CHF series
CHF series - In the material of the main body, only CHF-10N-20 is aluminum.
- It specializes in holding thin objects such as cloth, tape, film, and paper.
- This chuck should be used for pull test.
- Examples
The breaking examination of timber for wooden box made of the resin is being operated with vertical load measuring stand (K-501H) and a push-pull gauge as below.   A set of Film chuck (CHF-100N-20) is used.
Standard specification
Model CHF-100N
-20
CHF-200N
-20
CHF-500N
-50
External dimensional drawing CLICK! CLICK! CLICK!
Maximum load 100N 200N 500N
Width of chuckfs entrance 0`2mm 0`2mm 0`2mm
Size of tightening board 20mm 20mm 50mm
Shape of tightening surface Net Net Net
Material Iron Iron Iron
Special specification
Model CHF-10N
-20
CHF-100N
-50
CHF-500N
-70
External dimensional drawing CLICK! CLICK! CLICK!
Maximum load 10N 100N 500N
Width of chuckfs entrance 0`2mm 0`10mm 0`2mm
Size of tightening board 20mm 50mm 70mm
Shape of tightening surface Net Net Net
Material Aluminum Iron Iron
- Please write gseth when you order a set of upper and lower jig.
When you order a set, the board for installing resisting pressure board is attached to one side of the chuck.
The board for installing resisting pressure board isnft attached when you order single unit.
If you need the board, you can get it optionally.

- We will remodel the above-mentioned special items to your requested jig.
- The above-mentioned special items have been manufactured by our company before.
We will produce special jigs depend on your request except for the above-mentioned items.
Please feel free to contact us.
It makes an effort as brought close to a color as original as possible, and there is an image when it is actual and it differs somewhat from the color.
Please acknowledge it.
All contents Copyright:ATTONIC
All Rights Reserved
ATTONIC LTD. 600-5, Higashitakada-cho, Toyohashi, Aichi, Japan
TEL+81-532-41-5357@FAX+81-532-41-4826