Data & check for building trust
home Product guide Technological material Proofreading Company introduction Inquiry
Home > Products guide > Digital torque checker > DTC series Japanese site
Products guide
push-pull tester
digital force gauge
load stand
digital torque checker
AD-TM series
DTC series
ADT-C series
measuring jigs
PC torque analyzer
software to take date & etc.
DTC series


It$B!G(Bs a discontinued product.
(We are continuing to accept repairs and calibrations.)
(
We may not be able to repair depending on the repair content.)




It is more simple and lower-cost torque checker with existing function of ADT-C series, specializing in torque check of electric driver.
DTC series - Feature
It is a torque inspecting instrument that specializes in the check of electric drivers.
Of course, it can be used to check manual torque wrenches.
Common bit can be used for checking with standard equipped attachment.
To correspond to customer's special bit, we will do a special processing.
 (Additional cost will be charged.   Please inquire. )
You can choose appropriate measuring range from 8 models from 1N(I%(Bcm(0.1kgf(I%(Bcm) to 20N(I%(Bm(200kgf(I%(Bcm)
according to required torque.
The measuring torque value conforms to the torque data of Torque Analyzer (torque analysis system).
External in/output is not provided.
- Accessory
$B!&(BAC adaptor (IN:AC100V-240V OUT:DC9V 500mA) 1 piece
$B!&(BAttachment for electric driver 1 piece
$B!&(BScrew (Excluding a special attachment) for the attachment 2 pieces for each.
Attachment list according to the model
Catalog of DTC series / Manual of DTC series
- Standard issue
Unit of measurement N(I%(Bm(N(I%(Bcm)/kgf(I%(Bcm/in(I%(Blb
Accuracy $B!^(B0.5%F.S.
Measurement method Peak holding (maximum value)/tracking(present value)
Peak holding Digital analog holding
Response speed MAX.1mS
Display Four digit LCD
Permissive load 120$B!s(B
Power supply Chargeable battery   Ni-MH(For four charging time hours. )
Basic machine weight About 3.2kg
Model Range of measurement display Range of minimum display Attachment
DTC-1 1.00$B!A(B10.00$B#N!&(Bcm/0.100$B!A(B1.000kgf$B!&(Bcm/0.100$B!A(B1.000in$B!&(Blb 0.01$B#N!&(Bcm/0.001kgf$B!&(Bcm/0.001in$B!&(Blb TC-2$B!"(BTSS-5
DTC-2 2.0$B!A(B20.0$B#N!&(Bcm/0.20$B!A(B2.00kgf$B!&(Bcm/0.20$B!A(B2.00in$B!&(Blb 0.1$B#N!&(Bcm/0.01kgf$B!&(Bcm/0.01in$B!&(Blb TC-2$B!"(BTSS-5
DTC-5 5.0$B!A(B50.0$B#N!&(Bcm/0.50$B!A(B5.00kgf$B!&(Bcm/0.50$B!A(B5.00in$B!&(Blb 0.1$B#N!&(Bcm/0.01kgf$B!&(Bcm/0.01in$B!&(Blb TC-2$B!"(BTSS-5
DTC-10 0.100$B!A(B1.000$B#N!&(Bm/1.00$B!A(B10.00kgf$B!&(Bcm/1.00$B!A(B10.00in$B!&(Blb 0.001$B#N!&(Bm/0.01kgf$B!&(Bcm/0.01in$B!&(Blb TC-3$B!"(BTSS-10
DTC-20 0.20$B!A(B2.00$B#N!&(Bm/2.0$B!A(B20.0kgf$B!&(Bcm/2.0$B!A(B20.0in$B!&(Blb 0.01$B#N!&(Bm/0.1kgf$B!&(Bcm/0.1in$B!&(Blb TC-3$B!"(BTSS-20
DTC-50 0.50$B!A(B5.00$B#N!&(Bm/5.0$B!A(B50.0kgf$B!&(Bcm/5.0$B!A(B50.0in$B!&(Blb 0.01$B#N!&(Bm/0.1kgf$B!&(Bcm/0.1in$B!&(Blb TC-6$B!"(BTSS-30
DTC-100 1.00$B!A(B10.00$B#N!&(Bm/10.0$B!A(B100.0kgf$B!&(Bcm/10.0$B!A(B100.0in$B!&(Blb 0.01$B#N!&(Bm/0.1kgf$B!&(Bcm/0.1in$B!&(Blb TC-4$B!"(BTSS-30
DTC-200 2.0$B!A(B20.0$B#N!&(Bm/20$B!A(B200kgf$B!&(Bcm/20$B!A(B200in$B!&(Blb 0.1$B#N!&(Bm/1kgf$B!&(Bcm/1in$B!&(Blb TC-4$B!"(BTSS-30
- Function explanation

  Setting of each function can be operated by pushing $B!H(BFUN$B!I(Bbutton for seconds.
  Returning to measuring mode is also operated by pushing $B!H(BFUN$B!I(Bbutton for seconds.

1. Setting of peak holding mode/tracking mode
  Peak holding: The maximum value of measurement is displayed.
  Tracking: The value of present measurement is displayed.
2. History of memory data
  It is automatically memorized in the internal storage memory by pushing RESET button at peak mode .
   (The value when RESET button is pushed is memorized. )
3. Comparator setting
  The display of HI/LO appears to the display by setting the upper bound value and the lower bound value.
   (When the comparator output of the option is adhered, three kinds of judgments of HI/GO/LO are displayed by this set value. )
4. Setting at each measurement
  3 kinds of unit {N(I%(Bm(N(I%(Bcm)/kgf(I%(Bcm/in(I%(Blb} can be set.
5. Setting of overload
  $B!I(BOverload$B!I(Bindication can be displayed by setting maximum limit value of the result.
 (Maximum limit value of the result can be basically set at percentage of the limit value.   It cannot accept over 110% of the limit value. )
  Example (I%%%(B When you measure the torque of fastening a work with appropriarte attachment, you can use this function to hold the measurement just before breaking the work by setting perticular limit value.
6. Auto power OFF setting
  It is a function that the unit is turned off automatically when it doesn$B!G(Bt work  for over five minutes.
  If the function isn$B!G(Bt set, the unit isn$B!G(Bt turned off until battery shortage display is indicated.
7. Reversing setting of display
  It is a function that the display can be displayed reversely.
8. Battery shortage display
  The battery line decreases when the battery decreases.
  "BATT" appears in display when the battery line disappears.
To the head of this page
It makes an effort as brought close to a color as original as possible, and there is an image when it is actual and it differs somewhat from the color.
Please acknowledge it.
All contents Copyright:ATTONIC
All Rights Reserved
$B3t<02q<R% 600-5, Higashitakada-cho, Toyohashi, Aichi, Japan
info@attonic.co.jp