Data & check for building trust
home Product guide Technological material Proofreading Company introduction Inquiry
Home > Products guide > Digital torque checker > AD-TM series Japanese site
Products guide
push-pull tester
digital force gauge
load stand
digital torque checker
AD-TM series
DTC series
ADT-C series
measuring jigs
PC torque analyzer
software to take date & etc.
IIt is a high performance, precision, and easy-to use torque inspection instruemnt.

- Feature
It is mainly used to check the torque of electric driver.Of course, it can be used to check manual torque wrenches.
 Common + bit can be used for checking with standard equipped attachment.
To correspond to customer's special bit, we will do a special processing.
 (Additional cost will be charged.   Please inquire. )

You can choose appropriate measuring range from 6 models from 1N・cm(0.1kgf・cm) to 20N・m(200kgf・cm) according to required torque.
The measuring torque value conforms to the torque data of Torque Analyzer (torque analysis system).
The digit number switch function ( 3 digits /4 digits ) was added under many customers’expectation.

Following functions are normally equipped .
・USB connection
・Printer output (the printer is exclusively for Digimatic miniprocessor from MITUTOYO(DP-1VA))

- Accessory
AC adaptor (IN:AC100V-240V OUT:DC9V 1 piece
USB cable 1 piece
Attachment for driver 1 piece
Attachment for electric driver 1 piece
Screw (Excluding a special attachment) for the attachment 2 pieces for each.
Attachment list according to the model
Catalog of AD-TM series / Manual of AD-TM series
- Standard issue
Accuracy ±0.5%F.S.
Display Four digits LCD
Measurement mode Peak (maximum value)/Track(present value)/P-P(hold left and right peak values)
Power supply Chargeable battery   Ni-MH(1.2v×4 cells 1650mAh)
Unit of measurement N・m(N・cm)/kgf・cm(gf・cm)/lbf・in  (Switchable)
Auto power off Power off after leaving for 10 min.(Measurement without any time limit is also available)
dedicated charger input:AC100V~240V  output:DC9V
Basic machine weight About 2.4kg
Model(AD-) TM1 TM5 TM10 TM50 TM100 TM200
Measurement range ±1.000~
±10.00
N・cm
±5.00~
±50.00
N・cm
±10.00~
±100.0
N・cm
±0.500~
±5.000
N・m
±1.000~
±10.00
N・m
±2.00~
±20.00
N・m
±100.0~
±1000
gf・cm
±0.500~
±5.000
kgf・cm
±1.000~
±10.00
kgf・cm
±5.00~
±50.00
kgf・cm
±10.00~
±100.0
kgf・cm
±20.0~
±200.0
kgf・cm
±0.100~
±1.000
lbf・in
±0.500~
±5.000
lbf・in
±1.000~
±10.00
lbf・in
±5.00~
±50.00
lbf・in
±10.00~
±100.0
lbf・in
±20.0~
±200.0
lbf・in
- Function description
・Right peak / left peak measurement mode
A series of forward / reverse maximum torque measurementis separately displayed on a two-section screen
.
・External input / output function
The gauge can be operated by receiving external signals.
1.Continuous data capture signal "COP": It is possible to capture the data and see real-time changes while the "COP" signal is being input at 2KHZ intervals.
2.One-shot data capture signal "INT": Data can be captured at any time.

・USB connection
By connecting to a personal computer (PC) via USB, it is possible to change the settings of this meter by the PC, or send data to the PC.

・Printer output
Data can be output to a printer without PC.
*Please use Mitutoyo's Digimatic Mini Processor(DP-1VA) as the dedicated printer.

・With backlight
Clear visibility in dimly lit places.
To the head of this page
It makes an effort as brought close to a color as original as possible, and there is an image when it is actual and it differs somewhat from the color.
Please acknowledge it.
All contents Copyright:ATTONIC
All Rights Reserved
株式会社アトニック 600-5, Higashitakada-cho, Toyohashi, Aichi, Japan
info@attonic.co.jp